CMCPaints online

Premium Mipa products are sold as Kits, all kits come in the following forms, below is some information on correct hardeners in relevant temperatures. information below will break down what you will receive in your kit.

Please be sure to select appropriate hardener for the condition when spraying below is a guide for that selection.

Please note conventional 2K clear coat requires to be Baked to start the curing process if you cannot achieve PANEL temperature a minimum 50-60Deg Celsius for at least 30 minutes to start the bake cycle some of these clears may not be for you, if this is the case please contact us enquiries@cmcpaints.com.au to be advised of the safest options available.

Warning When using products containing isocyanate please follow all regulations of your state and territory including the use of PPE and other relevant measure to maintain your safety.

MS/HS10 for colder environments 10Deg Celsius up to 20Deg Celsius air temperature.

MS/HS25 for warmer days 20-30Deg Celsius air temperature.

MS/HS40 for the hot days 30Deg Celsius plus.

What you get in a Kit:  8.5 Litre Kits,  5litres of selected clear, 2.5 litres of selected hardener and 1 litre of 2k reducer.

2 Litre kits: 1 Litre of selected clear coat, 500ml hardener 500ml reducer.